To work around this issue, you need to install the latest version of Linux kernel. It may include ‘forcedeth’ patch, which is capable of resolving most of the incompatibility issues.

In some cases, after installing the latest version of Kernel, when you reboot the Linux system, you might face the following error message:

“fsck.ext2: No such file or directory while trying to open /dev/hda8. The super block could not be read or does not describe a correct ext2 file system. If the device is valid and it really contains an ext2 file system (and not swap or ufs or something else) then the super block is corrupt, and you might try running e2fsck with an alternate super block: e2fsck -b 8193 <device> fsck failed.”

After this error message, neither the system boots nor any file can be accessed.

Grounds of the issue

As stated in the error message, this problem generally occurs due to super block corruption or file system corruption.

è Super block and file system are two most important data structure of Linux system. Proper functioning of both these is required for ensuring effective working of the system.

After corruption, the operating system could not locate the file and thus can not retrieve it.

Resolution

To work around this problem, you need to install a fresh copy of super block and file system. It is possible through formatting of the hard drive and reinstallation of operating system.

Though, it will remove the errors but will also erase all the data stored on your hard drive. It is the worst scenario of data loss and needs Linux data recovery to get it fixed.

Linux data recovery is feasible with the application of third party Linux recovery software known as Linux data recovery software. Linux recovery software is easy to use and thus allow you to have simple and fast data recovery Linux.

Stellar Phoenix Linux Data Recovery is the most advanced Linux recovery software offered by the data recovery giant- Stellar. This data recovery Linux software works well in all data loss cases and allows Linux data recovery for all sorts of files.

Stellar Phoenix Linux Data Recovery software is powerful enough to carry out efficient scanning of entire hard drive and extract all lost data from it. The user interface of this software is very interactive and thus does not require any sound technical knowledge from users’ side.

At this point, it becomes essential to opt for Linux data recovery to retrieve lost, missing or inaccessible data from your Linux hard drive. In a practical scenario, when you try to boot your Linux computer that is using Ext2 file system, you might come across below error message: “EXT2-fs error (device 09:00): ext2_check_descriptors:

Block bitmap form not in group (block 3670099)! EXT2-fs: group descriptors corrupted” In Ext2 file system, Block Groups are the critical components that commutatively create file system and design block group descriptor that is responsible for controlling and managing file creation and accessing tasks. This significant data structure possesses Super Block, Block Bitmap, Inode Table and Inode Bitmap like information that plays a very critical role for Linux data accessing. In case of corruption to these data structures, you need data recovery linux to salvage data from your Linux hard drive.

Root of the problem

This behavior of Linux operating system occurs due to corruption to the block bitmap. Block bitmap works as a map of all the blocks in group. If you run fsck in this situation, you encounter corruption error message, which states that your file system is harshly damaged. If you manage to locate the damaged data structure and can replace it with alternative one, you can make your system functional. But this method does not help you to recover your data. To retrieve valuable data from hard drive, Linux Recovery is required. Recovery is best possible using third party Linux data recovery software. The applications are capable of methodically scanning affected Linux hard drive and extract all of the lost data from it. These tools are completely easy to use as they have interactive and simple graphical user interface. With non-destructive conduct, the applications never alter original data on the hard drive.

Stellar Phoenix Linux Data Recovery is the best ever made and the most effective application for absolute recovery. It work well with all major distributions of Linux operating system. The application recovers all lost, missing or inaccessible data from Ext4, Ext3, Ext2 and ReiserFS file system volumes.

Superblock is the most significant component of a Linux volume that restrains critical information about files and folders in file systems as ext2, ext3 and more. It enables us to mount and access the file systems. Superblock corruption primarily occurs due to metadata structure damage, file system corruption, unexpected system shutdown, malicious software like virus and more.

In most cases of superblock corruption, the volume becomes unmountable and the data becomes inaccessible. In such situations, you can restore the lost data using an updated backup. However, if you have not maintained any backup or it is not up-to-date, then you need to recover your data by using advanced Linux Data Recovery tools.

Consider a practical scenario, when you attempt to boot your Linux system, you encounter the below error message:

“Wrong fs type, bad option, bad superblock on /dev/hda8, missing codepage or helper program, or other error. In some cases useful info is found in syslog – try dmesg | tail or so”

After running dmesg tail, you encounter the below error message:

“Couldn’t mount because of unsupported optional features (2000200)”

After the above error message appears, the system becomes unmountable and data stored on the hard drive volume becomes inaccessible. Additionally, you encounter the same error message each time you attempt to boot your system.

Cause:

The main reason behind occurrence of the above error message is superblock corruption.

Resolution:

To resolve the problem and access all inaccessible data, you need to follow these steps:

1. Boot your system by using an alternate block by running the below command:

e2fsck -b 98304 /dev/hdb8

2. Once the file system gets restored to the point at which it can be mounted, you need to fix it by using this command:

e2fsck -c /dev/hda8

-c parameter checks for the bad blocks

However, if the above steps are not able to resolve the issue, you should consider reinstalling Linux. A clean Linux reinstall will erase all existing data from the selected volume. For complete recovery of lost data, you should use efficient Linux Data Recovery software.

Such Linux Recovery tools incorporate effective scanning algorithms to recover all your lost data. These recovery tools provide highly graphical user interface that makes them easily understandable without prior technical knowledge. These tools recover data post situations like superblock corruption, group descriptor faults, inode table damage and more.

Stellar Phoenix Linux Data Recovery is the foremost Linux Recovery tool. It supports recovery from Ext2, Ext3 and ReiserFS file system based Linux volumes. This Data Recovery Linux tool gets installed on Windows (Vista, XP, 2003 and 2000) and the affected Linux drive is connected as slave.

Are you facing “Read-only file system” error while booting your Linux computer? Does your system refuse to boot up in dual-boot configuration with Microsoft Windows operating system? When you encounter this behavior, system can not boot up and your data becomes inaccessible. At the same time, system may stop responding and you need to perform hard reboot. This overall behavior leads to significant data loss on your Linux system and need Linux Data Recovery to be sorted out.

In order to try fixing this issue on your Linux computer, identify the root cause of this problem. You may come across such circumstances due to any of the below reasons:

Damaged or corrupted file system

Improper unlock addresses for the LPC (Low Pin Count) flash chip

Hard drive failure

Linux automatically re-mounts the file system as read-only, if a hard drive failure takes place. In order to detect the affected system component and fix it, go through the underwritten steps:

To check error, integrity, and consistency of file system, unmount it first. If you can not unmount the file system, being root file system, force file system check at next reboot. If you find that file system is corrupted, hard drive formatting is required to rebuild or replace the damaged file system.

Run fsck command-line utility on the affected Linux hard drive. It is an in-built tool of Linux operating system, which lets you repair a number of issues with inode structure, data blocks, directory structures and more.

If hard drive failure is the problem, format hard drive, reinstall operating system, and restore data from the most recent backup.

Formatting is the process of creating a new copy of all the hard drive data structures, including file system. It removes every type of errors from the hard drive and make it as a new drive, deleting all the data, applications, and even operating system from it.

This process causes severe data loss, if the backup is not in place. In such conditions, Linux Recovery come for your rescue. You can carry out safe, quick, and easy Data Recovery Linux through third-party recovery applications.

Such tools are known as Linux Recovery Software. They use advanced scanning techniques to perform thorough scan of data loss affected hard drive and carry out absolute recovery in most of the logical data loss situations.

Stellar Phoenix Linux Data Recovery is the most effective and powerful application to retrieve lost Linux data. It recovers data from Ext4, Ext3, Ext2, FAT12, FAT16, and FAT32 file system volumes. The software works well with all major distributions of Linux operating system, including Red Hat, SUSE, Ubuntu, and Fedora.

In Linux operating system, fsck is a useful utility that helps you to check file system integrity and fix the errors. It is helpful particularly in case of file system corruption, dirty system shutdown and operating system related issues. When improper system shutdown happens, fsck runs when you reboot the system and check file system integrity. But if fsck process gets terminated due to improper system shutdown or power failure, you might come across serious data loss issues. In such circumstances, you are required to opt for effective and powerful Linux Data Recovery solutions.

In a practical scenario where fsck process gets interrupted due to power outage, when you restart the system, all of your hard drive volumes are found to be inaccessible. It cause critical data loss situations. When you try to sort out the problem by using fdisk command on Linux hard drive, you see following message: “Warning: invalid flag 0×0000 of partition table 4 will be corrected by w(rite) Command (m for help): p Disk /dev/hdb: 203.9 GB, 203928109056 bytes 255 heads, 63 sectors/track, 24792 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System Command (m for help):”

Cause

As stated in the above error message, the problem is caused by corruption to partition table. It is an important data structure of Linux operating system that stores important information about hard drive partitions/volumes. It is a 64-byte table, which store four partition entries, 16 byte for each. Damage to the partition table means your operating system could not locate partitions on hard drive and thus can not access them. In other means, you need to carry out Data Recovery Linux for fixing this issue.

Resolution

In order to work around this issue, you need to format the hard drive and reinstall Linux operating system. It will replace the damaged partition table with new one, after that system will work perfectly. But formatting the drive would remove all the data from it and you face serious data loss situations. Linux Recovery in such situations is possible using commercial Linux Data Recovery software. The applications are completely safe and easy to use and perform absolute recovery in most of the data loss situations. Stellar Phoenix Linux Data Recovery is the most comprehensive solution for all types of data loss situations. It recovers lost data from Ext4, Ext3, Ext2 and ReiserFS file system volumes. The application is usable with all major distributions of Linux operating system.

In Linux operating system, you can re-size the hard drive volumes with preservation of your critical data stored on the volume, using Gparted utility. It can also be used for creating, moving and removing hard drive volumes. In some situations, resizing the hard drive volume might cause serious problems of data loss. Unsuccessful operation of disk resizing might render the disk volumes and stored data inaccessible. In these cases, you are required to opt for effective and powerful Linux Data Recovery software to get all of the missing, lost and inaccessible data. In a practical scenario, when you resize the hard drive volumes using Gparted utility in Linux, read/write operation may halt it and the hard drive might not mount.

When you try to access data from the affected hard drive, you come across a number of error messages. In such situations, if you run fsck command to detect and repair errors, it does not detect any problem and you encounter further error messages. The error message can be similar to the following one: At this point, your Linux system does not boot up and thus you can not access the stored data form hard drive. In these circumstances, you need to find out the cause of this issue and go for Data Recovery Linux to retrieve lost data.

Cause of this problem

This issue generally occurs due to corruption to the Superblock. It is one of the most critical database of your Linux operating system. The above error message indicates that your file system is severely damaged and thus the system can not work.

Resolution

The Linux operating system keeps redundant copies of superblock. You can use any of them to sort out the problem. You can search alternative superblock using ‘mkfs -n’ command. If you are unable to replace damaged superblock or the problem is with file system, you can go for hard drive formatting and operating system reinstallation. The process will replace all the damaged system resources and install a clean file system. Though above process can resolve the current problem, but it also has a drawback. Formatting the hard drive removes all of the data from it and cause critical data loss situations.

In these cases, you require Linux Data Recovery to handle the situation. Recovery is best possible using third part Linux Recovery software. The applications use high-end scanning techniques to thoroughly scan the affected drive and retrieve all of the lost, missing and inaccessible data. They are quite easy and safe to use. Stellar Phoenix Linux Data Recovery is the most excellent solution for all your Linux data loss problems. It supports recovery from Ext4, Ext3, Ext2 and ReiserFS file system volumes. The software is compatible with all major Linux distributions including RedHat, Fedora, Debian and Ubuntu.

When you try to shut down your Kubuntu Linux system, using KDE (K Desktop Environment), KDE seems to shut down your computer without any issue, but then your screen becomes black and your system freezes without showing any error messages and getting towards shut down. In this case, you have to press reset button and do hard reboot.

KDE is a free desktop environment for Linux computers. The objective of this software is to give basic desktop features for daily needs of users as well as documentation and tools for developers to design stand alone applications for their systems.

After this behavior, when you restart your computer, you have to use fsck command for checking hard drive. It can recognize various errors related to file system and other disk data structures.

After this problem, you might experience two types of behavior, depending upon the effects of a hard reboot and severity of damage:

All the system settings may get lost with basic ones like desktop wallpaper, styles and taskbar layout. You may also lose other things like Kmail accounts, Kaddress book, Kopete settings, Amarok settings and sometimes your KDE Wallet (tool to store passwords on KDE system) gets corrupted.

fsck can’t fix the errors and your system does not boot up. You can not access data from your hard drive and thus encounter the daunting situations of data loss.

In case of data loss, you need to opt for linux data recovery to save your critical data. In such scenarios, Linux Data Recovery is possible through Linux Recovery software.

Linux Recovery software are specifically designed to scan your hard drive, locate the lost, missing or inaccessible data and recover it. You can easily use these software without any prior sound technical knowledge.

Stellar Phoenix Linux Data Recovery is the most comprehensive and commanding  linux recovery tool that ensures efficient Data Recovery Linux in all cases of data loss. It supports recovery from Ext2, Ext3 and ReiserFS file system based Linux volumes. It is compatible with most of the Linux distributions including Kubuntu.

HTML clipboard

For Linux file systems, Superblock plays a vital role. It defines the file system itself. Linux uses this metadata structure to hold its file system information like file system type, size, mount status and also metadata information about other file system structures. If superblock is found to be corrupt, file system can’t be mounted. This causes data loss and hence needs Linux Data Recovery as the solution. Superblock defines file system type and if it is corrupt, it may fail to give to this information with an error similar to:

“Superblock does not describe correct file system”

The error also describes that system is unable to read the superblock. Also, if device contains the file system, then its superblock is corrupt and fsck is required with an alternate superblock.

By alternative superblock , it refers to its duplicate copies on disk. Linux maintains duplicate copies of Superblock to avoid Linux Recovery requirements. These are located at different disk locations. The primary superblock lies at location 0 and group descriptors 1-6. However backup copies can be located using the following command:

# dumpe2fs /dev/sda2 | grep superblock

It will display the backup locations of superblock. Using these locations of superblock, file system can be attempted to mount. However if the process fails because of corrupt superblock backups, we need to refresh the file system by formatting the drive. It will create new copies of all file system structures. Lost data can be later restored using backup. However if no valid backup exists, Linux Data Recovery applications can help recovering.

Linux Recovery software are the applications to recover lost data using specific scanning algorithms. These applications can carry out recovery in all cases like superblock corruption, inode table damage, group descriptors faults and others. These software offer graphically rich user interface and hence can be used easily. These products are safe for data as are designed as read-only. They offer quality features that assist users in recovery. But the software are not recommended to be installed on same drive to prevent overwriting.

Stellar Phoenix Linux Data Recovery is the powerful and safe application to recover data from ext2, ext3 and reiserFS file system based disks. This software supports most of the Linux distributions like Red Hat, SUSE, SlackWare, Turbo Linux, Gentoo, Fedora and others. The application is safe for Ext3 Recovery and can be easily used through its graphical interface, which is rich of features.

Due to an improper shutdown, your system may not be able to boot and you might experience some error messages. The error message may sound like the followings:

“Your system appears to have shut down uncleanly
Press Y within 4 seconds to force file system integrity check”
According to the above error message, when you press Y, you may receive another error message stating:

“Checking root filesystem
[/sbin/fsck.ext2 (1) -- /] fsck.ext2 – a /
WARNING: couldn’t open /etc/fstat: no such file or directory
ext2fs_check_if_mount/

PROBLEM
Due to incapability the super block could not read or does not describe a correct ext2 file system.  If the device is authentic and it really contains an ext2 file system, then the super block is corrupt, and you might try running e2fsck with an alternate super block: e2fsck -b 8193 :
No such file or directory while determining whether / is mounted.
fsck.ext2: Is a directory while trying to open /
/etc/rc.d/rc.sysinit: line 415: failure: command not found.”

After highlighting the above errors, the system does not boot and one cannot access his precious data from hard drive and thus may face the problem of data loss.

REASON
This happens to Linux operating system due to severely corrupted root file system. Due to this problem, the operating system cannot find the required files to boot and thus shows you the error messages.
In Linux operating system, the root file system is the file system which is used to manage data on the root partition, the partition is the one on which operating system is installed. The Root file system retains very significant files and any kind of corruption in these files brings the need of Linux Data Recovery.

SOLUTION
The Linux Data Recovery is the process of retrieving the missing or inaccessible data from Linux hard drive. This can be done in the best possible way by using Linux Recovery Software. This software is able to scan your hard drive, locate the lost data and then perform Linux Recovery.
Stellar Phoenix Linux Data Recovery software is the best ever made and the most comprehensive Linux Recovery Software. It is efficient enough to thoroughly scan your hard drive and retrieve all of your data from it. One of most attracting features of Phoenix Linux Data Recovery is that it is compatible with most of the Linux flavors.

mksf.ext3 is a Linux command that allows you to create a Linux file system (ext3), generally in a hard disk partition. When executing the command, you need to specify the device name the file system should reside on. The command creates the file system with ext3 journal. If you execute this command on a system attached with multiple hard drives (for example, in RAID), it is recommended to specify the device name carefully. Failing to do so might result into data loss instances, such as inaccessible partitions. However, to cope up with such situations, you generally require restoring lost data from backup or using Linux Data Recovery applications that could effectively scan your drive and restore lost data at a safe location.

As an instance, you use a RAID 1 system with multiple drives (for say, /dev/sdb1 and /dev/sdc1) . Then,  you use MDADM to create RAID 1 device (for say, /dev/md0 )and apply mkfs.ext3 command on individual drives. After this, when you try to mount the system, the partitions appears to be inaccessible and you cannot access the data furthermore.

MDAM is the utility that could manage, create, monitor and delete MD devices (Linux software RAID)

Cause

A Linux system exhibits the similar behavior, as above, if running mkfs.ext3 command has overwritten the superblock information. This results into inaccessible partitions. Thus, if you require to use this command, it is recommended to run it on RAID device (/dev/md0 in this case) itself and not on other drives.

Solution

To solve such problems, you should perform these methods:

Try running the following command:

e2fsck -f /dev/md0

If problem persists, restore from backup

If no valid and clean data backup is available, you should scan your hard drive and recover your lost data by using Linux Recovery tools.

Linux Data Recovery applications are powerful data recovery tools that use effective scanning algorithms to recover lost data. These utilities are competent to examine a logically crashed drive and to perform safe recovery. Such tools provide you interactive user interface and safe options that assist achieving complete recovery results.

Stellar Phoenix Linux Data Recovery is an advanced data recovery application designed for Ext2, Ext3 and ReiserFS file system drives. It is a comprehensive Linux Recovery tool that provides safe recovery, complete documentation and rich set of features. The application is compatible with most of the Linux distributions including Red Hat, SlackWare, Turbo Linux, Unbuntu and more.